Maumee Technologies

Knowledge Center

Hematology analyzer wastewater: treatment considerations

Hematology analyzers produce smaller volumes than chemistry platforms, but their effluent is more concentrated. That changes how it is prepared for treatment.

What makes hematology effluent different

Hematology analyzer effluent is more concentrated than biochemistry effluent, so it needs a higher dilution to reach the right optical condition before UV-C treatment begins. In Maumee’s analyzer survey, hematology platforms typically produce around 45 to 110 L over an 8-hour day.

TRESA H: high dilution + UV-C

TRESA H is a compact, mobile unit for hematology analyzers. It applies controlled 1:10 dilution, then treats the effluent with two 95 W UV-C lamps, with a capacity of 12 L/h for up to two analyzers.

TRESA CIH for mixed laboratories

Where hematology analyzers sit alongside chemistry and immunoassay analyzers, TRESA CIH can treat the effluent of up to three analyzers in one cabinet, using active-carbon filtration and UV-C.

More from the Knowledge Center

Let’s treat biohazardous wastewater where it’s generated.

Tell us which analyzers you run and roughly how much effluent they produce. That helps our team advise which TRESA configuration may suit your site.

Request product information